Home > Video > Video Display > 10A&20A&30A LCD Solar Controller Dual USB Port 12V&24V Auto Battery Regulator

10A&20A&30A LCD Solar Controller Dual USB Port 12V&24V Auto Battery Regulator

10A&20A&30A LCD Solar Controller Dual USB Port 12V&24V Auto Battery Regulator—————————- MORE DETAILS BELOW —————————-Features-
1.Micro-computer CPU program control, PWA intelligent SOC control circuit. 2.DC5V 2A output with double USB output interface 3.With protections for lightening protection, over-charging, and over current 4.Double LED digital tube display. 5.Automatic identification for 12V and 24V storage battery 6.Battery display, light control-time delay functions 7.24V battery active program- -screen flashing will display “24”, unit the battery’s voltage restores to be normal. Note- if it’s a 12V battery supply, this function is forbidden to use, to avoid battery damage. This active program function is only for 24V battery supply which has not been used for a long time, and is identified as 12V battery because the voltage is too low.-
Applicable- solar power generation system- Solar power generation system for farming- Solar power street lights- Solar power garden lights- Solar power advertising board- Intelligent home products- Solar power traffic light, etc.
Product name
Smart solar controller
Current rating
System Voltage
12V-24V automatic identification
Power saving mode
System output
12V-24V- 5V
Powe diaplay
Circuit pressure drop
Light control-delay time
Over rechargig voltage
14.6V- 14.6V-2-24V
Product size
Over diachargig voltage
10.8V-12V- 10.8V-2-24V
Control mode
PWM pulse debug mode
Return voltage of over diacharging
12.2V-12V- 12.2V-2-24V
Package includes-
1 x Solar Controller 1 x User Manual
Details pictures-
Installation and usage- 1.To fix the controller well 2.Get cables prepared. It is suggested to multi copper insulating cables. Check the length of the cables firstly. Use as less cables and possible to reduce the power consumption after confirm the installation position. 3.Connect “-” pole of the storage battery of the controller firstly, and then connect “-” pole. Please be sure to avoid these 2 poles to touch each other, to prevent from damaging the battery and other parts. After connection, the display screen and the corresponding battery indicator of will light. If not, please check if the connection is correct. 4.Connect the solar power generation board. Firstly connect the “-” and “-” poles separately to the solar power battery board. After connection,leave the solar board outdoor with sunlight, then the recharging indicator will light. If not, please check the connection is correct 5.Overloading connection- to connect the overloading to the corresponding overloading output of the controller. Please do not mistake the connection of the “-” and “-” poles, in case to damage all the equipments. 6.Installation of the solar power generation board. To point at 12 clock direction of the sun at noon. The light collection side of the solar power generation board face to the south, keep a tilt angle of 45 degree to the ground to the ground, to be sure the board can burned by sun for a whole day Note- the controller must be installed in a position away from rain and snow. The cables of the solar power board and overloading follow “U” shape under the controller and fix well. Please be sure no rain will enter the controller. Fasten all screws of all cables ports, in case that the cables will get loose and cause a bad connection Warm- The battery connection must be firstly installed, and them connect the solar power generation board. If several wrong installations happen, it might burn and damage the controller Please do not use other power supply to replace the solar power board to test the system, otherwise it will damage the controller.The 10A&20A&30A LCD Solar Controller Dual USB Port 12V&24V Auto Battery Regulator has been widely used around the world
Communicate with Supplier?Supplier
Vencnet Jiang Mr. Vencnet Jiang
What can I do for you?
Chat Now Contact Supplier