Home > Video > Video Display > Fifth Wheel Hitch Installation, Ford F250 – etrailer.com

Fifth Wheel Hitch Installation, Ford F250 – etrailer.com

 are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
We begin the installation of our fifth wheel trailer hitch by lowering the spare tire on our 2008 Ford 250 Super Duty. Next, we want to loosen the bed bolts to make it easier to install the rails for our fifth wheel hitch. Now we can slide the first rail over the frame and under the truck bed. With first rail in place towards the rear of the truck, we can then slide the second rail into place. Once we have the rails in place across the truck, we insert the bolts to level out the mounting brackets. After the rails are in place and bolts tightened, we retighten the bed bolts to make sure there will be no shifting. This ensures that all of the holes we are going to drill will align properly. Now we mark the holes where we need to drill through the side of the frame at the front and rear of the frame brackets. Before drilling your holes, check the inside of the frame rail on each side of the truck to make sure it is clear of any wiring or lines that run from the front to the back of the truck.
Communicate with Supplier?Supplier
Vencnet Jiang Mr. Vencnet Jiang
What can I do for you?
Chat Now Contact Supplier