Home > Video > Video Display > Polar Hardware Enclosed Trailer Parts - Doors - 3057-55 Review - etrailer.com

Polar Hardware Enclosed Trailer Parts - Doors - 3057-55 Review - etrailer.com

Click for more info and reviews of this Polar Hardware Enclosed Trailer Parts:

Check out some similar Enclosed Trailer Parts:

Don’t forget to subscribe!

Full transcript: 
Today we are going to be taking a look at the 55 inch Lock Side Door Lock Bar-lock assembly. This can-door 00:00:07 style lock is ideal for you 00:00:09sawing trailer's side doors, that may be smaller than rear doors. It's going to be made from a steel construction. It's going to have rust and corrosion resistant Zinc coating. Your mounting hardware is not included, but we do recommend using 5/16th inch carriage bolts and matching washers and nuts for the installation. The length of those bolts will be dependent on the thickness of your trailer wall. Now I just want to spend some time going over some measurements really quickly with you. 

The overall pipe length, that's measuring from one end of the unit, to the other, that's where we are going to get the 55 inch measurement from. If we take our measurement in the distance that we have between the brackets, you can see here that on each bracket we are going to have 2 mount holes. If I measure from the outermost hole, so the outermost hole measuring center on center, that's going to give a measurement of 53 and 3/4 of an inch. The ones that are closest to each other, center on center, that measurement is going to give us a measurement of 47 and 1/4 of an inch. The bracket and hinge area; that's this whole unit, that's going to give us an overall width measurement of about 2 inches wide and the length of that is going to measure about 4 and 1/2 inches. The mount holes on the brackets, these are going to be separated apart from one another on center, by 3 and 1/4 of an inch. 

The distance that we have, from the center of the handle to the top 00:01:48 mounting hole in the unit, that's going to give a measurement of 26 and 3/4 of an inch. This does include your handle keeper. It's going to be these two components here, so with the 9 00:02:06 hardware installed this top piece would swivel out of the way. That way, you can lift up the handle and release it. This is actually going to be two pieces; again, its got the swivel design there, that way you can come out of the way and you can remove the handle. You can see here that it does have the center hole, that's going to be the lock hole, if you want to install the padlock. 

It does not include the lock but we carry a lot of those here on our website, so if you are in need of one, you can check out some really great options at 00:02:38. The diameter of the lock holes is going to be a 1/2 of an inch. The distance that we have from the center of one mounting hole of the unit, to the center of the other, here on the handle keeper, kind of flip this over to give us a little bit more accurate measurement, that's going to be separated on-center by 4 inches. Again, really nice design on the handle itself. Its got a nice, easy-grip design. Its got that coating on there, so allows you to get a really nice, secure, grip when using the handle. But again, this is going to be a total length if 55 inches and that steel construction makes it very durable and dependable design. 

That's going to do it for today's look at the 55 inch lock, Side door bar-lock Assembly.
Communicate with Supplier?Supplier
Vencnet Jiang Mr. Vencnet Jiang
What can I do for you?
Chat Now Contact Supplier